This process will install the universal UD3 PCL6 drivers. For copier-specific drivers, please contact the Helpdesk.

1. Right click the Start Menu icon on the bottom of your screen and click Run.
   1. Alternatively, use Win+R.
   2. The Run dialog box will appear in the bottom left.
      
2. Type \\print and then click OK.

   If prompted for credentials, use your campus username and password.
   What is my Username and Password?

3. Find the printer you’d like to connect to in the window that appears, then right click on it and click Connect… 
   
   
   • The printer should connect and automatically install the appropriate drivers. 
4. Check that the printer is set up correctly by:
   1. Going to Settings > Bluetooth & devices > Printers & scanners and looking for the chosen copier. 
      
   2. Doing a test print from software like Notepad, Word, etc.

1. Find the copier you'd like to print to from the list below. Click the model number to download the driver.
   

   Name	Model	Location
   Brickman-2-A	Sharp 70C45	Admissions 2nd floor
   Doering-2-A	Sharp 70C45	2nd floor
   Pendleton-2-B	Sharp 50C26	Theological school
   Pendleton-2-C	Sharp 50C26	College office
   Library-1-A	Sharp 50C26	Archives
   CollegeCenter-3-Students	Sharp 50C26	3rd floor
   Pendleton-1-A	Sharp 70C36	1st floor
   Pendleton-2-A	Sharp 70C36	Mail room
   Doering-1-A	Sharp 70C36	1st floor
   Library-2-Students	Sharp 70C36	Front desk
   CollegeCenter-1-A	Sharp B540WR	Health center

2. After it downloads, click on it to begin the installation by opening the .dmg file.
   
3. Double-click the installer package to begin the installation. 
   
4. Click Continue and follow the prompts. 
    
   1. Make sure to authenticate when prompted.
      
5. When the installation has finished, close the installer. 
   
6. Click the Apple icon in the top left, then click System Settings… 
   
7. Click Printers & Scanners from the sidebar. Then click Add Printer, Scanner, or Fax… 
   
8. Click the Advanced icon (gears) and then click the Type drop-down menu and select Windows printer via spoolss.
   
   

   If the Advanced icon does not appear, right click on the toolbar at the top near the icons, click Customize Toolbar… then drag the Advanced icon from the pop-up window onto the toolbar. Click Done.

9. In the URL: box, enter smb://print/ and then the name of the printer (e.g. smb://print/Pitcairn-1-A).
   
10. On the Use: drop-down menu, select Choose a Driver…
    1. See the table below for complete list of names:
       

       Name	Model	Location
       Brickman-2-A	Sharp 70C45	Admissions 2nd floor
       Doering-2-A	Sharp 70C45	2nd floor
       Pendleton-2-B	Sharp 50C26	Theological school
       Pendleton-2-C	Sharp 50C26	College office
       Library-1-A	Sharp 50C26	Archives
       CollegeCenter-3-Students	Sharp 50C26	3rd floor
       Pendleton-1-A	Sharp 70C36	1st floor
       Pendleton-2-A	Sharp 70C36	Mail room
       Doering-1-A	Sharp 70C36	1st floor
       Library-2-Students	Sharp 70C36	Front desk
       CollegeCenter-1-A	Sharp B540WR	Health center

11. Click Select Software…
    
12. Search for the model of printer you’d like to add (see table above), then select the driver and click OK.
    
13. Click Add. 
    
    
    1. When you first direct connect to a printer, it will prompt you for your network credentials. It is important that you include anc\ at the beginning, e.g. anc\<network username>

    If you don't remember what to enter here, see What is my Username and Password?

14. To set up punching and stapling, change Output Tray Options: to Inner Finisher and Punch Module to 3 Holes if the options appear. Otherwise, leave the default settings.
    
15. Click OK on the setup pop-up box. 
    
16. You can confirm the printer has been added by going back to Printers & Scanners.
     
17. Make sure to select the preferred printer from the Printer drop-down menu when printing your next document.
    

1. While on campus, go to bit.ly/bacwinprint in your browser.
   1. This will automatically begin downloading the installer.
2. Click on the installer from your download history to open it. 
   
3. Once it opens, follow the prompts to install Print Deploy.

   Make sure to authenticate with any prompts that appear during installation and allow the program to make changes to your PC when prompted. 

4. After it finishes installing, a click Sign in with Microsoft in the pop-up box.
   
5. After you’ve signed in with your Microsoft 365 account, Print Deploy should look like this. 
   
   1. Ensure that FindMe says Installed on the righthand side.

   You can now close the window and Print Deploy will run in the background.

6. When printing a document, select FindMe and print to it. You can then go to one of the campus copiers and release the print there.
   1. If you have your Bryn Athyn College ID card, scan it to release the print.
   2. If you don’t have your ID card, you can use the pin found on the PaperCut dashboard and enter that manually at the printer.

1. Go to bit.ly/bacmacprint in your browser.
   • This will automatically begin downloading the installer.
2. Click the installer from your downloads history to open it.
   
3. Double-click the .pkg file in the pop-up window to start the installation. 
   
4. Click Continue and follow the prompts to install Print Deploy.
   

   Make sure to allow any permissions requests and to authenticate when prompted.

5. Once the installation is complete, click Sign in with Microsoft in the pop-up box. 
   
6. After the installation is finished, Print Deploy should look like this.
   
   1. Ensure that FindMe says Installed on the righthand side.

   You can now close Print Deploy, and it will run in the background. 

7. When printing from the software of your choice, select FindMe and print to it. You can then go to any of the campus copiers and release the print there with your ID card or PaperCut ID.